We Buy New & Used Surplus Heat Exchangers
Sell your shell & tube, plate, air-cooled, brazed plate, spiral, or tube-bundle heat exchangers for cash. 100% upfront. Free freight. Any condition.
- 100% upfront payment — we pay before pickup
- Free nationwide pickup, rigging & freight handled by us
- Fast cash offers, usually within 24 hours of photos
- We buy any condition: working, idle, damaged, or scrap
Every type of heat exchanger
Pick your type for a buying guide and resale value range — or just call for a fast offer.
Shell & Tube
shell and tube heat exchangers
We buy these →Plate & Frame
plate and frame heat exchangers
We buy these →Air-Cooled (Fin-Fan)
air-cooled heat exchangers
We buy these →Brazed Plate
brazed plate heat exchangers
We buy these →Double Pipe
double pipe heat exchangers
We buy these →Finned Tube
finned tube heat exchangers
We buy these →Spiral
spiral heat exchangers
We buy these →U-Tube Bundles & Replacement Tube Bundles
U-tube and replacement tube bundles
We buy these →Sell your heat exchanger in 3 steps
1. Send photos & the nameplate
Text or email a few photos plus the nameplate data (manufacturer, model, surface area, materials, pressure rating). One unit or a full lot — we buy both.
2. Get a cash offer fast
We value your equipment and send a firm cash offer, usually within 24 hours. No obligation.
3. We pay upfront & haul it away
On acceptance we pay 100% upfront and arrange all rigging and freight at no cost to you. You get paid; we handle the heavy lifting.
See full process →Know what your exchanger is really worth
The materials in your exchanger drive its resale value. A titanium, cupro-nickel, or stainless unit can be worth far more reused than recycled.
| Material | Why it matters for resale value |
|---|---|
| Carbon steel | the most common shell/tube material; lowest scrap value but highest resale demand for standard process duty |
| 304 stainless steel | corrosion resistant, widely reused in food, dairy and chemical service |
| 316 / 316L stainless steel | molybdenum-bearing grade for chloride and marine service; strong resale value |
| Copper | found in tube bundles and HVAC coils; high recovery value |
| Admiralty brass | classic condenser tube alloy; valued for both scrap and reuse |
| Cupro-nickel (90/10 & 70/30) | seawater and brackish-water service; premium resale and scrap |
| Titanium | used in aggressive chloride, seawater and chemical duty; the highest-value exchanger material |
Your cash offer depends on type, size, materials, and condition. See why resale beats recycling →
We buy in all 50 states
- Houston, TX
- Pasadena, TX
- Beaumont, TX
- Port Arthur, TX
- Corpus Christi, TX
- Midland, TX
- Dallas, TX
- Fort Worth, TX
- San Antonio, TX
- Austin, TX
- Baton Rouge, LA
- Lake Charles, LA
- New Orleans, LA
- Geismar, LA
- Los Angeles, CA
- Long Beach, CA
- San Francisco, CA
- San Jose, CA
- Fresno, CA
- Sacramento, CA
- Chicago, IL
- Joliet, IL
- Peoria, IL
- Channelview, TX
- Philadelphia, PA
- Pittsburgh, PA
- Newark, NJ
- Trenton, NJ
- Edison, NJ
- New York, NY
- All locations →
Frequently asked questions
Do you really buy used heat exchangers in any condition?
Yes. We buy working, idle, surplus, decommissioned, damaged, and even scrap-grade heat exchangers. Condition affects the offer, but we make offers on virtually every unit. Send photos and the nameplate, or call 951-403-5738.
How fast can I get a cash offer?
Most sellers receive an offer within 24 hours of sending photos and the nameplate data. For full lots or plant decommissioning, we can schedule a same-week site visit. Call 951-403-5738 to start.
Who pays for rigging, removal, and freight?
We do. On accepted offers we arrange and pay for rigging, loading, and freight nationwide. You do not pay out of pocket to sell your equipment to us.
When do I get paid?
We pay 100% upfront on accepted offers — funds are arranged before pickup, not after resale. We can pay by wire, check, or ACH.
What information do you need to make an offer?
The nameplate (manufacturer, model, surface area, design pressure/temperature, materials), overall dimensions, quantity, and a few photos. If you have the U-1 form or original data sheet, even better.
Get a fast cash offer for your heat exchanger
Send a few photos and the nameplate. Most offers go out within 24 hours. We pay 100% upfront and handle rigging and freight nationwide.